You must have javascript enabled to use rc-car.org !

TYCO Fast Traxx Replacement High Low Gear w/ Ball Bearings for Stripped

Gearbox

USD $17.85

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Toys & Hobbies / Radio Control & Control Line / RC Model Vehicles & Kits / Cars, Trucks & Motorcycles

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

For sale is one replacement High/Low gear for the 9.6v TYCO Fast Traxx. The low side of this gear is what most often strips out, in part due to its small size and in part due to the gear wobbling as it wears out against the shaft; this makes the low/high-torque setting on the gearbox inoperable for one or both tracks. It has double ball bearings to minimize wear and heat, reducing the likelihood of the low gear becoming stripped again. The gear itself is the same material and design as the original; making it stronger would likely only make a different gear strip during extreme driving, so I left it alone as a safe and replaceable 'fuse'. Note that color may vary. Also note that these gears use bearings with a 3mm inner diameter, while the shaft on your car might be slightly thicker or thinner (depending on wear and the tolerances of the rod material TYCO decided to use on the particular day your car was made). You may need to clamp the shaft onto a drill and use some sandpaper to thin it down slightly so that it slides freely for gear switching. The next bearing size up is 1/8th inch inner diameter, which is universally too loose, so this is unfortunately unavoidable. I test each gear I send out using a rod that is precisely 2.99mm, so please measure the shaft you have and plan accordingly if it is significantly thicker than that. Finally, note that there are two of these gears in each Fast Traxx, one for each track. If both sides are stripped, you will need to buy two. Please ensure that the rest of the gearbox is in good shape before replacing this gear. If wear or looseness in some other component (such as on the shaft it rotates on) caused your original gear to fail, the same will likely happen to this one sooner or later. Grease liberally on installation, especially at the shaft. Made in the USA. Buy with confidence, 100% feedback!

Returns Accepted for this item if it's within 30 Days

TYCO Fast Traxx Replacement High Low Gear w/ Ball Bearings for Stripped Gearbox
gear
See more
Price type
IN STOCK OUT STOCK